Lucent Technologies MERLIN Plus Release 2 System Manual page 173

Copy
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
5-54 MERLIN Plus System Features
If there are two or more voice terminals that require identical feature
assignments, the system administrator can use the Copy feature to copy the line
and programmable feature assignments from one voice terminal onto another.
When the administrator uses the Copy feature, the MERLIN Plus system copies
the line assignments from one voice terminal to the other. Feature assignments
are always overwritten by lines.
Several other features are also copied during the Copy process: Ringing Options,
Voice Announcement Enable/Disable, Automatic Line Selection, Personalized
Ringing, Button-Free feature, and Call Restrictions except for Allowed Lists.
The "System Answer" button programmed for the System Answer feature cannot
be copied. If attempted, the corresponding button on the voice terminal you are
copying to will be blank.
If you have a 5-button voice terminal, you cannot copy any lines or feature onto
a larger voice terminal, or vice versa.
Except for the 5-button voice terminal, the administrator can copy the lines and
features from any small voice terminal onto a larger voice terminal. If you are
the system administrator, you might want to copy the button assignments from a
BIS-10 onto a BIS-22 voice terminal for example. You can also copy from a
large voice terminal to a smaller voice terminal. However, if you copy lines or
features from a large voice terminal onto a smaller voice terminal, such as from a
BIS-34 to a BIS-22, the system copies only those lines and/or features for which
there are corresponding buttons on the smaller voice terminal. For example, in
copying the lines and features from a BIS-34 voice terminal onto a BIS-22 voice
terminal, the system copies only those lines and/or features assigned to the three
left columns of buttons (the first 22 buttons) of the BIS-34 voice terminal.
The rightmost column of buttons on the BIS-34 voice terminal will not be copied
onto the smaller voice terminal.
Be sure to label the buttons on the voice terminal to which lines or features have
been copied.
If any voice terminal in the system is active on a call, you must wait until it is
idle before you can use Copy.
If your responsibilities do not include system administration, skip this
information.
To copy line and feature assignments from one voice terminal to another:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Touch the Auto Intercom button or dial the intercom number of the voice
2
terminal to which you want to copy line assignments.
Touch Copy.
3