Lucent Technologies MERLIN Plus Release 2 System Manual page 90

CALL RESTRICTIONS
ASSIGNMENT FORMS
3-34 Systemwide Options
For those voice terminals with a check mark in the "Disallowed List" column on
the form, follow the procedure below:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *0900.
2
Follow the appropriate procedure below:
3
To assign the Disallowed List to all voice terminals, touch
NOTE:
Conference.
> Touch the Auto Intercom button for the voice terminal you want to assign
the Disallowed List.
The green light goes on next to the Auto Intercom button.
> Dial the appropriate code from the Dial Code chart located earlier in this
section under the heading "The BIS-22 Voice Terminal Used as an
Administrator Console" for the voice terminal to which the Disallowed
List is to be assigned.
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
For those voice terminals with a check mark in the "Unrestricted" column on the
form, you don't have to do anything here because when your system is first
installed, all voice terminals are unrestricted.
Check marks in the "Toll Restricted" and "Outward Restricted" columns show
the type of restriction you want to place on the voice terminal.
To assign either outward call restrictions or toll call restrictions to voice
terminals, follow the procedure below:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Follow the appropriate procedure:
2
> Touch the Auto Intercom button of the voice terminal you want to
restrict.
> Dial the intercom number of the voice terminal you want to restrict.
Touch Restrict until the green light next to it shows the kind of call
3
restriction you want the voice terminal to have:
Steady green light on =
Flashing green light =
Green light off
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
Unrestricted (all talk permitted)
Toll restricted (local and intercom calls only)
=
Outward restricted (intercom calls only)