Lucent Technologies MERLIN Plus Release 2 System Manual page 277

Touch-Tone
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
5-158 MERLIN Plus System Features
Enable
This feature is for rotary lines only.
NOTE:
If you have telephone lines that carry rotary signals, use the Touch-Tone Enable
feature to switch to Touch-Tone signals midway through a dialing sequence.
This lets you take advantage of bank-by-phone, credit card authorization,
computer access, and alternate long distance services.
When you hang up your handset after using this feature on a call, your system
returns to rotary signals.
None
To program a Touch-Tone Enable button for your voice terminal:
Label the button Touch-Tone Enable.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *76.
4
Slide the T/P switch to the
5
T P
To switch from rotary pulse to Touch-Tone signals as you dial a number:
Touch Speakerphone or lift your handset.
1
Dial the first part of the number.
2
Touch Touch-Tone Enable.
3
Dial the remaining numbers.
4
Speaker-
phone
center position.
T
Touch-
Tone Enbl.
76
Touch-
Tone Enbl.
no.
P
no.