Lucent Technologies MERLIN Plus Release 2 System Manual page 99

Administration Procedure
Designate a telephone jack on the control unit
for Call Reports.
Set the minimum call duration for Call Report
records.
Set the calls reported option for Call Reports.
Print a System Feature Report.
1 Enter administration mode.
2 Dial *82.
The green light goes on next to the Auto Intercom button for the jack to which
the data collector and printer are currently assigned.
3 Touch the Auto Intercom button for the new telephone jack to which you are
assigning the data collector and printer.
The green light goes off next to the Auto lntercom button for the old jack,
and the green light next to the Auto Intercom button for the new jack goes on.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *83.
3
Dial one digit (0 through 9) for the minimum number of minutes.
The system adds 10 seconds to the number of minutes you select.
NOTE:
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *84.
3
Dial the code for the calls reported option you wane
0 = no calls reported
1 = outgoing calls only
2 = outgoing and incoming calls
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2
Dial the code for the report or set of reports you want:
*60 for one system administration report and individual phone reports.
*61 for a system administration report.
*62 plus touch one or more Auto Intercom buttons or dial one or more
intercom numbers for individual phone reports.
*63 to abort a printout and cancel all other report requests.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode.
Quick Reference Guide to System Administration
Do This
(continued)
3-43