Lucent Technologies MERLIN Plus Release 2 System Manual page 100

Administration Procedure
Designate a voice terminal jack on the control
unit for System Feature Reports.
Program a telephone using Centralized
Programming.
Lock the programming function at a voice
terminal
Designate a voice terminal jack on the control
unit for Busy Buster.
3-44 Quick Reference Guide to System Administration
1 Enter administration mode.
2 Dial *85.
If previously administered, the green light goes on next to the Auto Intercom
button for the jack to which the data collector and printer are currently
assigned.
3 Touch the Auto Intercom button of the jack to which the data collector and
printer are connected.
The green light goes off next to the Auto Intercom button for the old jack,
and the green light next to the Auto Intercom button for the new jack goes on.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the phone
you want to program.
3 Touch Conference.
4 Program the telephone.
5 Touch Conference.
6 Leave administration mode.
1 Enter administration mode.
2 Dial *89.
3 Touch the Auto Intercom button or dial the dial code of the voice terminal
you are administering.
Green light on = the voice terminal is locked
Green light off = the voice terminal is unlocked and can be programmed
Touch CONFERENCE to enable program mode lock systemwide.
NOTE:
Touch DROP to disable program mode lock systemwide.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *35.
3
Touch the Auto Intercom button or dial the intercom number for the voice
terminal jack to which you want the BB jack connected.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
Do This
(continued)