Display Qos-Interface Mirrored-To - 3Com 5500-EI PWR Reference Manual

Parameters
interface-type interface-number: Specifies the type and number of the port, of which the
line rate configuration is to be displayed.
unit-id: Unit ID of the switch for which line rate configuration is to be displayed. For the
value range for the unit-id argument, refer to
Description
Use the display qos-interface line-rate command to display the line rate configuration of
a port or the ports on a unit.
Related commands: line-rate.
Examples
# Display the line rate configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 line-rate
Ethernet1/0/1: line-rate
Inbound: 128 Kbps
Burst bucket size: 16 Kbyte
Refer to Table 1-3

display qos-interface mirrored-to

Syntax
display qos-interface { interface-type interface-number | unit-id } mirrored-to
View
Any view
Parameters
interface-type interface-number: Specifies the type and number of a port for which traffic
mirroring configuration is to be displayed.
unit-id: Unit ID of the switch for which traffic mirroring configuration is to be displayed. For
the value range for the unit-id argument, refer to
Description
Use the display qos-interface mirrored-to command to display the traffic mirroring
configuration of a port or a unit.
Related commands: mirrored-to.
Examples
# Display the traffic mirroring configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet1/0/1 mirrored-to
for the description on the output fields.
Table 1-2.
Table 1-2.
1-7