Display Dhcp Server Expired - 3Com 5500-EI PWR Reference Manual

ip ip-address: Specifies one IP address.
Description
Use the display dhcp server conflict command to display the statistics of IP address conflicts on the
DHCP server.
Related commands: reset dhcp server conflict.
Examples
# Display the statistics of IP address conflicts.
<Sysname> display dhcp server conflict all
Address
192.168.0.1
--- total 1 entry ---
Table 1-1 Description on the fields of the display dhcp server conflict command
Address
Discover Time

display dhcp server expired

Syntax
display dhcp server expired { ip ip-address | pool [ pool-name ] | interface [ interface-type
interface-number ] | all }
View
Any view
Parameters
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string of 1 to 35
characters, is the name of an address pool. If you do not provide this argument, this command applies
to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not specify a VLAN
interface, this command applies to all VLAN interfaces.
all: Specifies all DHCP address pools.
Description
Use the display dhcp server expired command to display the lease expiration information about one
IP address, or the lease expiration information about all IP addresses in one or all DHCP address pools.
When all the IP addresses in an address pool are assigned, the DHCP server assigns the expired IP
addresses to DHCP clients.
Discover time
Apr 2 2000 00:25:46 AM
Field
1-24
Description
Conflicting IP address
Time when the conflict is detected