Reset; Rip - 3Com 5500-EI PWR Reference Manual

<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rip
[Sysname-rip] preference 20

reset

Syntax
reset
View
RIP view
Parameters
None
Description
Use the reset command to reset the system configuration parameters of RIP.
When you need to re-configure the parameters of RIP, you can use this command to restore the default.
Examples
# Reset the RIP system configuration.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rip
[Sysname-rip] reset
% Reset RIP's configuration and restart RIP? [Y/N]y

rip

Syntax
rip
undo rip
View
System view
Parameters
None
Description
Use the rip command to enable RIP or enter RIP view.
Use the undo rip command to disable RIP.
By default, the system does not run RIP.
You must enable RIP and enter RIP view before configuring RIP global parameters. You can, however,
configure the interface-related parameters no matter whether RIP is enabled.
3-11