Service-Type - 3Com 5500-EI PWR Reference Manual

A user can choose the [change user password] option on the client only after passing the
authentication. If the user fails the authentication, this option is in grey and is unavailable.
Examples
# Under the default ISP domain "system", set the URL of the web page used to modify user password
on the self-service server to http://10.153.89.94/selfservice/modPasswd1x.jsp|userName.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain system
[Sysname-isp-system]
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName

service-type

Syntax
service-type { ftp | lan-access | { telnet | ssh | terminal }* [ level level ] }
undo service-type { ftp | lan-access | { telnet | ssh | terminal }* }
View
Local user view
Parameters
ftp: Specifies that this is an FTP user.
lan-access: Specifies that this is a LAN access user (who is generally an Ethernet access user, for
example, 802.1x user).
telnet: Authorizes the user to access the Telnet service.
ssh: Authorizes the user to access the SSH service.
terminal: Authorizes the user to access the terminal service (that is, allows the user to log into the
switch through the Console port).
level level: Specifies the level of the Telnet, terminal or SSH user. Here, level is an integer ranging from
0 to 3 and defaulting to 0.
Description
Use the service-type command to authorize a user to access one or more types of services.
Use the undo service-type command to inhibit a user from accessing specified types of services.
By default, a user is inhibited from accessing any type of service.
You may user the display local-user command to view the types of services that a user is authorized
to access.
Examples
# Authorize user1 to access the Telnet service.
<Sysname> system-view
self-service-url
1-25
enable