Multicast Static-Group Interface - 3Com 5500-EI PWR Reference Manual

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

Description
Use the igmp-snooping special-query source-ip command to configure the source address to be
carried in IGMP group-specific queries.
Use the undo igmp-snooping special-query source-ip command to restore the default.
By default, the Layer 2 multicast switch sends group-specific query messages with the source IP
address of 0.0.0.0.
Related commands: igmp-snooping querier.
Examples
# Configure the switch to send group-specific query messages with the source IP address 2.2.2.2 in
VLAN 3.
<Sysname> system-view
System view, return to user view with Ctrl+Z.
[Sysname] igmp-snooping enable
[Sysname] vlan 3
[Sysname-vlan3] igmp-snooping enable
[Sysname-vlan3] igmp-snooping special-query source-ip 2.2.2.2

multicast static-group interface

Syntax
multicast static-group group-address interface interface-list
undo multicast static-group group-address interface interface-list
View
VLAN interface view
Parameters
group-address: IP address of the multicast group to join, in the range of 224.0.0.0 to 239.255.255.255.
interface interface-list: Specifies a port list. With the interface-list argument, you can define one or more
individual ports (in the form of interface-type interface-number) and/or one or more port ranges (in the
form of interface-type interface-number1 to interface-type interface-number2, where interface-number2
must be greater than interface-number1). The total number of individual ports plus port ranges cannot
exceed 10. For port types and port numbers, refer to the parameter description in the "Port Basic
Configuration" part in this manual.
Description
Use the multicast static-group interface command to configure the specified port(s) under the current
VLAN interface as static member port(s) for the specified multicast group.
Use the undo multicast static-group interface command to remove the specified port(s) in the
current VLAN as static member port(s) for the specified multicast group.
By default, no port is configured as a static multicast group member port.
5-19

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents