Display Domain - 3Com 5500-EI PWR Reference Manual

<Sysname> display connection
------------------unit 1------------------------
Index=40 , Username=user1@domain1
MAC=000f-3d80-4ce5
On Unit 1: Total 1 connections matched, 1 listed.
# Display information about the user connection with index 0.
[Sysname] display connection ucibindex 0
Index=0 , Username=user1@system
MAC=000f-3d80-4ce5
Access=8021X
Initial VLAN=1, Authorization VLAN=1
ACL Group=Disable
CAR=Disable
Priority=Disable
Start=2000-04-03 02:51:53 ,Current=2000-04-03 02:52:22 ,Online=00h00m29s
On Unit 1:Total 1 connections matched, 1 listed.
Total 1 connections matched, 1 listed.
Here, Port NO=0x10003001 means (by the binary bits):
Table 1-1 Description of the Port NO field
31 to 28 bit
UNIT ID

display domain

Syntax
display domain [ isp-name ]
View
Any view
Parameters
isp-name: Name of an ISP domain, a string of up to 128 characters. This must be the name of an
existing ISP domain.
Description
Use the display domain command to display configuration information about one specific or all ISP
domains.
Related commands: access-limit, domain, scheme, state.
, IP=0.0.0.0
, IP=192.168.0.3
,Auth=CHAP ,Port=Ether
27 to 24 bit
Slot number
,Port NO=0x10003001
23 to 20 bit
Sub-slot number Port number
1-11
19 to 12 bit 11 to 0 bit
VLAN ID