Update Fabric - 3Com 5500-EI PWR Reference Manual

[Sysname] poe update refresh 0400_001.S19
Update PoE board successfully

update fabric

Syntax
update fabric { file-url | device-name file-url }
View
User view
Parameters
file-url: File path + file name of the host software in the flash memory, a string of 1 to 64 characters. The
specified PSE processing software is a file with the extension .s19.
device-name: Specified device in the fabric, in the format of unit[NO.]>flash:, which means that the
target file is saved in the flash of this device.
Description
Use the update fabric command to upgrade the PSE processing software of the fabric switch remotely
on any device in the fabric.
Examples
# Upgrade the PSE processing software poe2046.s19 in the flash of unit 2 to upgrade the PSE
processing software of all the units in the fabric.
<Sysname> update fabric unit2>flash:/poe2046.s19
This will update the Fabric. Continue? [Y/N] y
The software is verifying ...
The result of verification is :
Unit ID Free space(bytes)
1
2
warning: the verification is completed, start the file transmission? [Y/N] y
The fabric is being updated,
The poe2046.s19 is stored on unit 1 successfully!
The poe2046.s19 is stored on unit 2 successfully!
Do you want to set poe2046.s19 to be running agent next time to boot?[Y/N] y
The poe2046.s19 is configured successfully!
2588900
2591972
100%
Enough Version comparison
Y Y
Y Y
1-12