Ftp Cluster - 3Com 5500-EI PWR Reference Manual

Hops to administrator device
IP
Version

ftp cluster

Syntax
ftp cluster
View
User view
Parameters
None
Description
Use the ftp cluster command to connect to the shared FTP server of the cluster and enter FTP Client
view through the management device.
You can use the ftp-server command on the management device to configure the shared FTP server of
the cluster, which is used for software version update and configuration file backup of the cluster
members.
Related commands: ftp-server.
For how to access other FTP servers using the ftp command, refer to the FTP-SFTP-TFTP part of the
manual.
Examples
# Connect to the FTP server shared by the cluster.
<123_1.Sysname> ftp cluster
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in.
Field
1-28
Description
Hops from the device to the management device
Device IP address
Software version of the device