3Com 5500-EI PWR Reference Manual page 1168

Examples
# Display the test results of the test group with administrator name administrator, and operation tag
icmp.
<Sysname> display remote-ping results administrator icmp
remote-ping entry(admin administrator, tag icmp) test result:
Destination ip address:10.2.2.2
Send operation times: 10
Min/Max/Average Round Trip Time: 1/2/1
Square-Sum of Round Trip Time: 13
Last succeeded test time: 2004-11-25 16:28:55.0
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
Table 1-2 Description on the fields of the display remote-ping result command
Destination ip address
Send operation times
Receive response times
Min/Max/Average Round Trip Time
Square-Sum of Round Trip Time
Last succeeded test time
SD Maximal delay
DS Maximal delay
Packet lost in test
Disconnect operation number
System busy operation number
Operation sequence errors
Other operation errors
Operation timeout number
Connection fail number
Drop operation number
Field
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Destination IP address
Number of probes made
Number of received response packets
Minimum/maximum/average roundtrip time, in
milliseconds
Square sum of roundtrip time
Completion time of the last successful test
Maximum delay from the source to the
destination
Maximum delay from the destination to the
source
Average packet loss ratio
Number of times the test was disconnected by
the remote end
Number of times the test failed because the
system was busy
Number of out-of-sequence packets received
Number of other errors
Number of time-out occurrences in a test
Number of failures to connect with the remote
end
Number of system resource allocation failures
1-7
Description