3Com 5500-EI PWR Reference Manual page 660

Hide thumbs Also See for 5500-EI PWR:

Table of Contents

VLAN interface view

Use the local-proxy-arp enable command to enable local proxy ARP on the VLAN interface.

Use the undo local-proxy-arp enable command to disable local proxy ARP on the VLAN interface.

By default, local proxy ARP is disabled on the VLAN interfaces of a switch.

# Enable local proxy ARP on VLAN-interface 2.

<Sysname> system-view

[Sysname] interface vlan-interface 2

[Sysname-Vlan-interface2] local-proxy-arp enable

Chapters

Table of Contents

5500-ei series