Fabric-Port Enable - 3Com 5500-EI PWR Reference Manual

2 000f-e20f-5132 5
3 000f-e20f-5252 5
4 000f-e20f-8922 5
5 000f-cbb7-2142 5
6 000f-cbb7-3264 5
7 000f-cbb7-2260 5
8 000f-cbb7-2734 5
From the above example, you can see the priority of each unit changes from 10 to 5, and the numbering
mode changes from A (automatic numbering) to M (manual numbering).
# Remove the saved unit ID of each unit.
<Sysname> undo fabric save-unit-id
The saved unit ID will be erased.
Are you sure? [Y/N] y
Unit 1 removed unit ID successfully.
%Apr 2 19:43:24:368 2000 Sysname FTM/3/FTMCHIDAUTO:- 1 -Change unitid to auto successful,
unit 1 removed UnitID from flash!
Unit 2 removed unit ID successfully.
Unit 3 removed unit ID successfully.
Unit 4 removed unit ID successfully.
Unit 5 removed unit ID successfully.
Unit 6 removed unit ID successfully.
Unit 7 removed unit ID successfully.
Unit 8 removed unit ID successfully.
# Display the unit IDs of the current fabric.
<Sysname> display ftm topology-database
Total number of units in fabric : 8, My Unit ID : 1
UID CPU-Mac
*1 000f-e20f-5002 10
2 000f-e20f-5132 10
3 000f-e20f-5252 10
4 000f-e20f-8922 10
5 000f-cbb7-2142 10
6 000f-cbb7-3264 10
7 000f-cbb7-2260 10
8 000f-cbb7-2734 10
From the above example, you can see the priority of each unit restores to 10 and the numbering mode
changes from M (manual numbering) to A (automatic numbering).

fabric-port enable

Syntax
fabric-port interface-type interface-number enable
undo fabric-port interface-type interface-number enable
View
System view
Left/ 1
/Right 1
Left/ 1
/Right 1
Left/ 1
/Right 1
Left/ 1
Priority Fabric-Port Board-ID A/M
/Right 1
Left/ 1
/Right 1
Left/ 1
/Right 1
Left/ 1
/Right 1
Left/ 1
M
M
M
M
M
M
M
A
A
A
A
A
A
A
A
1-10