Udp Helper Configuration Commands; Display Udp-Helper Server; Reset Udp-Helper Packet - 3Com 5500-EI PWR Reference Manual

1

UDP Helper Configuration Commands

UDP Helper Configuration Commands

display udp-helper server

Syntax
display udp-helper server [ interface Vlan-interface vlan-id ]
View
Any view
Parameters
vlan-id: VLAN interface number.
Description
Use the display udp-helper server command to display the UDP broadcast relay forwarding
information. The information includes the VLAN interface enabled with UDP Helper, IP address of the
destination server, and the number of UDP packets forwarded to the destination server. If a vlan-id is
specified, UDP broadcast relay forwarding information of the specified VLAN interface is displayed.
Examples
# Display the UDP broadcast relay forwarding information on VLAN-interface 1.
<Sysname> display udp-helper server interface Vlan-interface 1
Interface name
Vlan-interface1
The information above shows that the IP address of the destination server corresponding to
VLAN-interface 1 is 192.1.1.2, and no packets have been forwarded to the destination server.
Table 1-1 Description on the fields of the display udp-helper server command
Field
Interface name
Server address
Packets sent

reset udp-helper packet

Syntax
reset udp-helper packet
Server address
192.1.1.2
Interface enabled with UDP Helper
Destination server IP address to which UDP packets are forwarded
Number of UDP packets forwarded to the destination server
1-1
Packets sent
0
Description