Qos-Profile Port-Based - 3Com 5500-EI PWR Reference Manual

Parameters
profile-name: QoS profile name, a case-insensitive string of 1 to 32 characters, starting with an English
letter in the range a to z and A to Z. Note that a QoS profile name cannot be all, interface, user, undo,
or name.
Description
Use the qos-profile command to create a QoS profile and enter QoS profile view. If the QoS profile
already exists, this command leads you to the corresponding QoS profile view.
Use the undo qos-profile command to remove a QoS profile.
To remove or modify a QoS profile already applied to a port, you must remove the QoS profile from the
port first.
If the QoS profile is applied to the port manually, use the undo apply qos-profile command to
remove the QoS profile from the port.
If the QoS profile is applied to the port dynamically, log off the user connected to the port to remove
the QoS profile from the port.
Examples
# Create a QoS profile named a123.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] qos-profile a123
[Sysname-qos-profile-a123]

qos-profile port-based

Syntax
qos-profile port-based
undo qos-profile port-based
View
Ethernet port view
Parameters
None
Description
Use the qos-profile port-based command to configure the QoS profile application mode on a port to
be port-based.
Use the undo qos-profile port-based command to restore the default.
By default, the application mode of a QoS profile is user-based.
Note that:
2-5