Display Qos-Interface Traffic-Redirect - 3Com 5500-EI PWR Reference Manual

View
Any view
Parameters
interface-type interface-number: Specifies the type and number of a port for which priority
marking configuration is to be displayed.
unit-id: Unit ID of the switch whose priority marking configuration is to be displayed. For the
value range for the unit-id argument, refer to
Description
Use the display qos-interface traffic-priority command to display the priority marking
configuration of a port or a unit.
Related commands: traffic-priority.
Examples
# Display the priority marking configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet1/0/1 traffic-priority
Ethernet1/0/1: traffic-priority
Inbound:
Matches: Acl 2000 rule 0
Priority action: dscp ef
Refer to Table 1-3

display qos-interface traffic-redirect

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-redirect
View
Any view
Parameters
interface-type interface-number: Specifies the type and number of a port for which traffic
redirecting configuration is to be displayed.
unit-id: Unit ID of the switch whose traffic redirecting configuration is to be displayed. For
the value range for the unit-id argument, refer to
Description
Use the display qos-interface traffic-redirect command to display the traffic redirecting
configuration of a port or a unit.
Related commands: traffic-redirect.
running
for the description on the output fields.
Table 1-2.
Table 1-2.
1-9