Calling-Station-Id Mode - 3Com 5500-EI PWR Reference Manual

NAS-IP-address and session ID) contained in the message, and ends the accounting of the users
based on the last accounting update message.
4) Once the switch receives the response from the CAMS, it stops sending Accounting-On
messages.
5) If the switch does not receive any response from the CAMS after it has tried the configured
maximum number of times to send the Accounting-On message, it will not send the Accounting-On
message any more.
After configuring the accounting-on enable command, you need to execute the save command
so that the command can take effect when the switch restarts.
This function requires the cooperation of the H3C CAMS system.
Related commands: nas-ip.
Examples
# Enable the user re-authentication at restart function for the RADIUS scheme named radius1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable

calling-station-id mode

Syntax
calling-station-id mode { mode1 | mode2 } { lowercase | uppercase }
undo calling-station-id mode
View
RADIUS scheme view
1-31