3Com 5500-EI PWR Reference Manual page 1138

System View: return to User View with Ctrl+Z.
[Sysname] interface ethernet1/0/1
[Sysname-Ethernet1/0/1] port auto-power-down
reboot
Syntax
reboot [ unit unit-id ]
View
User view
Parameters
unit-id: Unit ID of a switch.
Description
Use the reboot command to restart a specified Ethernet switch.
Before rebooting, the system checks whether there is any configuration change. If yes, it prompts
whether or not to proceed. This prevents the system from losing the configurations in case of shutting
down the system without saving the configurations.
Examples
# Directly restart this switch without saving the current configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file,
please wait......
This command will reboot the device. Current configuration will be lost in next startup if
you continue.
This will reboot device. Continue? [Y/N] y
<Sysname>
%Apr 2 00:06:01:148 2006 Sysname DEV/5/DEV_LOG:- 1 -
Continue? [Y/N] y
3-13