Reset Traffic-Statistic - 3Com 5500-EI PWR Reference Manual

scheduling configuration only when the configuration of a port is different from the
global configuration.
Related commands: display queue-scheduler.
Examples
# Configure WRR as the queuing algorithm and set the weights of queues 0 through 7 to 2,
2, 4, 4, 6, 6, 8, and 8 globally in system view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] queue-scheduler wrr 2 2 4 4 6 6 8 8
# Configure Ethernet 1/0/1 to adopt the WRR queue scheduling algorithm, setting the
weights of queue 0 through queue 7 to 1, 2, 3, 4, 5, 6, 7, and 8.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] queue-scheduler wrr 1 2 3 4 5 6 7 8
# Display the global queue scheduling configuration.
[Sysname-Ethernet1/0/1] display queue-scheduler
Queue scheduling mode: weighted round robin
weight of queue 0: 2
weight of queue 1: 2
weight of queue 2: 4
weight of queue 3: 4
weight of queue 4: 6
weight of queue 5: 6
weight of queue 6: 8
weight of queue 7: 8
# Display the queue scheduling configuration on Ethernet 1/0/1.
[Sysname-Ethernet1/0/1] display this
#
interface Ethernet1/0/1
queue-scheduler wrr 1 2 3 4 5 6 7 8
#
return

reset traffic-statistic

Syntax
reset traffic-statistic inbound acl-rule
View
Ethernet port view
1-23