Ip Address Bootp-Alloc - 3Com 5500-EI PWR Reference Manual

Table 5-2 Description on the fields of the display bootp client command
Vlan-interface1
Allocated IP
Transaction ID
Mac Address
Default router

ip address bootp-alloc

Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
VLAN interface view
Parameters
None
Description
Use the ip address bootp-alloc command to configure a VLAN interface to obtain an IP address
through BOOTP.
Use the undo ip address bootp-alloc command to cancel the configuration.
By default, a VLAN interface does not use BOOTP to obtain an IP address.
Related commands: display bootp client.
Examples
# Configure VLAN-interface 1 to obtain an IP address through BOOTP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ip address bootp-alloc
Field
5-4
Description
VLAN-interface 1 is configured to obtain an IP
address through BOOTP.
IP address allocated to the VLAN interface
Value of the XID field in BOOTP packets
MAC address of the BOOTP client
Default router