System View: return to User View with Ctrl+Z.
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] pim bsr-boundary
pim dm
Syntax
pim dm
undo pim dm
View
Interface view
Parameters
None
Description
Use the pim dm command to enable PIM-DM.
Use the undo pim dm command to disable PIM-DM.
By default, PIM-DM is disabled.
Typically, PIM-DM should be enabled on all interfaces.
Before enabling PIM-DM, you must enable multicast routing first.
Related commands: multicast routing-enable.
Examples
# Enable PIM-DM on VLAN-interface 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] multicast routing-enable
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] pim dm
pim neighbor-limit
Syntax
pim neighbor-limit limit
undo pim neighbor-limit
View
Interface view
Parameters
limit: Maximum number of PIM neighbors on the interface, in the range of 0 to 128.
3-11