Traffic-Statistic - 3Com 5500-EI PWR Reference Manual

traffic-remark-vlanid
Syntax
traffic-remark-vlanid inbound acl-rule remark-vlan remark-vlanid
undo traffic-remark-vlanid inbound acl-rule
View
Ethernet port view
Parameters
inbound: Maps the VLAN IDs carried in the inbound packets to a specified VLAN ID.
acl-rule: ACL rules to be applied for traffic classification. This argument can be the
combination of multiple ACLs. For more information about this argument, refer to
and Table 1-5. Note that the ACL rules referenced must be those defined with the permit
keyword.
remark-vlan remark-vlanid: Specified the target VLAN ID, to which the VLAN IDs of the
packets matching specific ACL rules are to be mapped.
Description
Use the traffic-remark-vlanid command to enable VLAN mapping and set the target
VLAN ID for packets matching specific ACL rules.
Use the undo traffic-remark-vlanid command to disable VLAN mapping for packets
matching specific ACL rules.
Related commands: display qos-interface traffic-remark-vlanid.
Examples
# Enable VLAN mapping on Ethernet 1/0/1 to map the VLAN IDs of the inbound packets
sourced from VLAN 5 to VLAN ID 1001.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] rule permit source 5
[Sysname-acl-ethernetframe-4000] quit
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1]
remark-vlan 1001

traffic-statistic

Syntax
traffic-statistic inbound acl-rule
undo traffic-statistic inbound acl-rule
traffic-remark-vlanid
1-33
inbound link-group
Table 1-4
4000