Reset Ip Routing-Table Statistics Protocol - 3Com 5500-EI PWR Reference Manual

Age: 20:17:41
**Destination: 1.1.1.1
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42
**Destination: 2.2.2.0
Protocol: #DIRECT
*NextHop: 2.2.2.1
State: <Int ActiveU Retain Unicast>
Age: 20:08:05
For descriptions of route states, see
Table 1-5 lists the statistics of the routing table.
Table 1-5 Description on the fields of the display ip routing-table verbose command
Holddown
Delete
Hidden

reset ip routing-table statistics protocol

Syntax
reset ip routing-table statistics protocol { all | protocol }
View
User view
Parameters
all: Specifies all protocols.
protocol: Specifies a protocol, which can be direct, ospf, ospf_ase, ospf_nssa, rip, or static.
Description
Use the reset ip routing-table statistics protocol command to clear the statistics of routes in a
routing table.
Examples
# Before executing the reset ip routing-table statistics protocol command, use the display ip
routing-table statistics command to display the routing statistics:
<Sysname> display ip routing-table statistics
Routing tables:
Proto route
DIRECT 4
STATIC 0
Cost: 0/0
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Cost: 0/0
Mask: 255.255.255.0
Preference: 0
Interface: 2.2.2.1(Vlan-interface2)
Cost: 0/0
Table 1-2.
Field
active added
4 12
0 0
1-12
Description
Number of suppressed routes
Number of deleted routes
Number of hidden routes
deleted
8
0