Monitor Link Configuration Commands; Display Monitor-Link Group; Link-Aggregation Group - 3Com 5500-EI PWR Reference Manual

2

Monitor Link Configuration Commands

Monitor Link Configuration Commands

display monitor-link group

Syntax
display monitor-link group { group-id | all }
View
Any view
Parameters
group-id: Monitor link group ID, ranging 1 to 24.
all: Specifies all the monitor link groups.
Description
Use the display monitor-link group command to display monitor link group information.
Examples
# Display the information about monitor link group 1.
<Sysname> display monitor-link group 1
Monitor link group 1 information:
Member Role
----------------------------------------------------------------------
SMLK-2 UPLINK
AGG-1 DOWNLINK
Table 2-1 Description on the fields of the display monitor-link group command
Field
Member
Role
Status
Last-up-time
Last-down-time

link-aggregation group

Syntax
link-aggregation group group-id { uplink | downlink }
Status Last-up-time
UP 16:37:20 2006/4/21
UP
Member of the monitor link group
Role of monitor link group member port: UPLINK or DOWNLINK
Status of monitor link group member port: UP or DOWN
Last time the port is up
Last time the port is down
Last-down-time
16:37:20 2006/4/20
Description
2-1