Display Remote-Ping - 3Com 5500-EI PWR Reference Manual

By default, no destination port number is configured for a test.
Related commands: destination-ip.
The destination-port command has effect on jitter, TCP-Private, and UDP-Private tests only.
It is not recommended to perform a TCP, UDP, or jitter test on a well-known port (ports with a
number ranging from 1 to 1023) . Otherwise, the remote-ping test will fail or the corresponding
service of the well-known port will become unavailable.
Examples
# Set the destination port number for a tcpprivate test to 9000.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator tcp
[Sysname-remote-ping-administrator-tcp] test-type tcpprivate
[Sysname-remote-ping-administrator-tcp] destination-port 9000

display remote-ping

Syntax
display remote-ping { results | history | jitter } [ administrator-name operation-tag ]
View
Any view
Parameters
results: Displays results of the last test.
history: Displays the history records of tests.
jitter: Displays the jitter test information.
administrator-name: Name of the administrator who created the remote-ping test operation, a string of 1
to 32 characters.
operation-tag: Operation tag, a string of 1 to 32 characters.
Description
Use the display remote-ping command to display the result of the last remote-ping test or the history
of remote-ping tests.
Without administrator-name test-operation-tag specified, the command displays the results of all test
groups; without administrator-name test-operation-tag specified, the command displays the results of
the specified test group.
Related commands: test-enable.
1-6