User-Name-Format - 3Com 5500-EI PWR Reference Manual

Description
Use the timer response-timeout command to set the response timeout time of TACACS
servers.
Use the undo timer response-timeout command to restore the default response timeout time of
TACACS servers.
By default, the response timeout time of TACACS servers is five seconds.
As HWTACACS is based on TCP, both server response timeout and TCP timeout may cause
disconnection from TACACS server.
Related commands: display hwtacacs.
Examples
# Set the response timeout time of TACACS servers to 30 seconds for HWTACACS scheme
hwt1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer response-timeout 30

user-name-format

Syntax
user-name-format { with-domain | without-domain }
View
HWTACACS scheme view
Parameters
with-domain: Specifies to include ISP domain names in the usernames to be sent to TACACS
server.
without-domain: Specifies to exclude ISP domain names from the usernames to be sent to
TACACS server.
Description
Use the user-name-format command to set the format of the usernames to be sent to TACACS
server.
By default, the usernames sent to TACACS server in a HWTACACS scheme carry ISP domain
names.
Note that:
Generally, an access user is named in the userid@isp-name format. Here, isp-name behind the @
character represents the ISP domain name, by which the device determines which ISP domain a
user belongs to. However, some old TACACS servers cannot accept the usernames that carry ISP
domain names. In this case, it is necessary to remove domain names from usernames before
1-75