Port Auto-Power-Down - 3Com 5500-EI PWR Reference Manual

Description
Use the display transceiver manuinfo interface command to display part of the electrical label
information of a single or all anti-spoofing pluggable transceivers customized by H3C.
Examples
# Display part of the electrical label information of the anti-spoofing pluggable transceiver customized
by H3C on interface GigabitEthernet 1/0/25.
<Sysname> display transceiver manuinfo interface gigabitethernet 1/0/25
GigabitEthernet1/0/25 transceiver manufacture information:
Manu. Serial Number
Manufacturing Date
Vendor Name
Table 3-9 Description on the fields of display transceiver manuinfo interface
Manu. Serial Number
Manufacturing Date
Vendor Name

port auto-power-down

Syntax
port auto-power-down
undo port auto-power-down
View
Ethernet port view
Parameters
None
Description
Use the port auto-power-down command to enable auto power down on an Ethernet port.
Use the undo port auto-power-down to restore the default.
By default, auto power down is not enabled on an Ethernet port.
Note that, currently, in the S5500-EI series Ethernet switches, the auto power down configuration does
not take effect on
Examples
# Enable auto power down on Ethernet 1/0/1.
<Sysname> system-view
: 213410A0000054000251
: 2007-07-28
: H3C
Field
.
1000BASE-X SFP Ports
Serial number generated during debugging and
testing
Debugging and testing date.. The date takes the
value of the system clock of the computer that
performs debugging and testing.
Vendor name specified, that is, H3C.
3-12
Description