Dhcp Enable - 3Com 5500-EI PWR Reference Manual

Description
Use the bootfile-name command to specify a bootfile name in the DHCP global address pool for the
client.
Use the undo bootfile-name command to remove the specified bootfile name from the DHCP global
address pool.
By default, no bootfile name is specified.
If you execute the bootfile-name command repeatedly, the latest configuration will overwrite the
previous one.
Examples
# Specify the bootfile name aaa.cfg in DHCP global address pool 0 for the client..
<Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-ip-pool-0] bootfile-name aaa.cfg

dhcp enable

Syntax
dhcp enable
undo dhcp enable
View
System view
Parameters
None
Description
Use the dhcp enable command to enable DHCP.
Use the undo dhcp enable command to disable DHCP.
By default, DHCP is enabled.
Note that: You need to enable DHCP before performing other DHCP-related configurations.
1-3