Timer Response-Timeout - 3Com 5500-EI PWR Reference Manual

The setting of the real-time accounting interval depends, to some degree, on the performance of
the switch and the RADIUS server. The higher the performance of the switch and the RADIUS
server is, the shorter the interval can be. It is recommended to set the interval as long as possible
when the number of users is relatively great (≥1000).
different numbers of users.
Table 1-6 Numbers of users and recommended intervals
1 to 99
100 to 499
500 to 999
≥1000
Related commands: retry realtime-accounting, radius scheme.
Examples
# Set the real-time accounting interval of RADIUS scheme radius1 to 51 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] timer realtime-accounting 51

timer response-timeout

Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameters
seconds: Response timeout time of RADIUS servers, ranging from 1 to 10 seconds.
Description
Use the timer response-timeout command to set the response timeout time of RADIUS servers.
Use the undo timer response-timeout command to restore the default response timeout time of
RADIUS servers.
By default, the response timeout time of RADIUS servers is 3 seconds.
Note that:
Number of users
Table 1-6
Real-time accounting interval
3
6
12
≥15
1-58
lists the recommended intervals for