3Com 5500-EI PWR Reference Manual page 325

Cost: 10 State: DROther
Priority: 1
Designated Router: 192.168.0.153
Backup Designated Router: 192.168.0.154
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Area 0.0.0.2:
Authtype: none
SPF scheduled: <>
7/5 translator state: Enabled
Interface: 30.1.1.1 (Vlan-interface2)
Cost: 10 State: BackupDR
Priority: 1
Designated Router: 30.1.1.2
Backup Designated Router: 30.1.1.1
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Table 4-3 Description on the fields of the display ospf brief command
Field
RouterID
Border Router
Spf-schedule-interval
Routing preference
Default ASE parameters
SPF computation count
Area Count
Nssa Area Count
Area
Authtype
Type: Broadcast
Flags: <Nssa>
Type: Broadcast
Router ID of the router
Whether the router is a border router:
Area: ABR
AS: ASBR
Nssa Area AS: NSSA ABR
Interval of SPF schedule
OSPF route preference, including
Inter/Intra: Inter-area/intra-area route preference
External: External route preference
Default ASE parameters of OSPF redistributed routes, including
Metric: Route cost
Tag: Route tag
Type: Route type
SPF computation count since OSPF is enabled
Areas for connection to this router
Number of NSSA areas
Area ID
OSPF authentication type of the area:
None: Non-authentication
Simple: simple authentication
MD5: MD5 authentication
4-11
Description