Reset Stop-Accounting-Buffer; Retry - 3Com 5500-EI PWR Reference Manual

Examples
# Clear RADIUS message statistics.
<Sysname> reset radius statistics

reset stop-accounting-buffer

Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name }
View
User view
Parameters
radius-scheme radius-scheme-name: Deletes the buffered stop-accounting requests of a specified
RADIUS scheme. Here, radius-scheme-name is the name of a RADIUS scheme, which is a string of up
to 32 characters that does not contain any of the following characters: /:*?<>.
session-id session-id: Deletes the buffered stop-accounting requests of a specified session. Here,
session-id is a session ID, which is a string of up to 50 characters.
time-range start-time stop-time: Deletes the buffered stop-accounting requests generated within a
specified time period. Here, start-time is the start time of the time period, stop-time is the end time of the
time period, and both are in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Deletes the buffered stop-accounting requests of a specified user. Here,
user-name is the name of a user, which is a string of up to 184 characters.
Description
Use the reset stop-accounting-buffer command to delete stop-accounting requests that are buffered
on the switch due to getting no response.
Related commands:
stop-accounting-buffer.
Examples
# Delete the stop-accounting requests buffered for user user0001@aabbcc.net.
<Sysname> reset stop-accounting-buffer user-name user0001@aabbcc.net
# Delete the stop-accounting requests buffered from 0:0:0 08/31/2002 to 23:59:59 08/31/2002.
<Sysname> reset stop-accounting-buffer time-range 00:00:00-08/31/2002 23:59:59-08/31/2002

retry

Syntax
retry retry-times
stop-accounting-buffer
1-48
enable, retry stop-accounting, display