Terminal Monitor; Terminal Trapping - 3Com 5500-EI PWR Reference Manual

Description
Use the terminal logging command to enable log terminal display.
Use the undo terminal logging command to disable log terminal display.
By default, log terminal display is enabled for console users and terminal users.
Examples
# Disable log terminal display.
<Sysname> undo terminal logging

terminal monitor

Syntax
terminal monitor
undo terminal monitor
View
User view
Parameters
None
Description
Use the terminal monitor command to enable the debugging/log/trap information terminal display
function.
Use the undo terminal monitor command to disable the function.
By default, this function is enabled for console users and terminal users.
This command works only on the current terminal. The debugging/log/trap information can be output on
the current terminal only after this command is executed in user view.
Disabling the function has the same effect as executing the following three commands: undo
terminal debugging, undo terminal logging and undo terminal trapping. That is, no
debugging/log/trap information will be displayed on the current terminal.
If the function is enabled, you can run the terminal debugging/undo terminal debugging,
terminal logging/undo terminal logging or terminal trapping/undo terminal trapping
command to enable or disable debug/log/trap terminal output respectively.
Examples
# Disable terminal display.
<Sysname> undo terminal monitor

terminal trapping

Syntax
terminal trapping
undo terminal trapping
1-21