Memory Auto-Establish Enable - 3Com 5500-EI PWR Reference Manual

memory auto-establish enable

Syntax
memory auto-establish enable
View
System view
Parameters
None
Description
Use the memory auto-establish enable command to enable automatic connections of routing
protocols when the free memory of the switch recovers to the specified value.
Use the memory auto-establish disable command to disable this function.
By default, when the free memory of the switch recovers to a safety value, connections of all the routing
protocols will always recover (when the free memory of the switch decreases to a lower limit, the
connection will be disconnected forcibly).
By default, this function is enabled.
Related commands: memory auto-establish disable, memory, display memory limit.
Examples
# Enable automatic connections of all routing protocols when the free memory of the current switch
recovers.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] memory auto-establish enable
6-5