<Sysname> display arp | exclude 68
Type: S-Static
IP Address
10.2.72.162
---
1 entry found
Refer to
Table 1-1
display arp count
Syntax
display arp count [ [ dynamic | static ] [ | { begin | exclude | include } regular-expression ] |
ip-address ]
View
Any view
Parameters
dynamic: Counts the dynamic ARP entries.
static: Counts the static ARP entries.
|: Uses a regular expression as the match criterion. For detailed information about regular expressions,
refer to Configuration File Management Command in this manual.
begin: Displays the number of ARP entries counted from the first one containing the specified string.
exclude: Displays the number of ARP entries that do not contain the specified string.
include: Displays the number of ARP entries containing the specified string.
regular-expression: A case-sensitive character string.
ip-address: IP address. The ARP entries containing the IP address are to be displayed.
Description
Use the display arp count command to display the number of the specified ARP entries. If no
parameter is specified, the total number of ARP entries is displayed.
Related commands: arp static, reset arp.
Examples
# Display the total number of ARP entries.
<Sysname> display arp count
14 entries found
display arp timer aging
Syntax
display arp timer aging
View
Any view
D-Dynamic
MAC Address
VLAN ID
000a-000a-0aaa
N/A
---
for the description on the above output information.
Port Name / AL ID
N/A
1-6
Aging Type
N/A
S