Display System-Guard Ip-Record; Display System-Guard L3Err State - 3Com 5500-EI PWR Reference Manual

display system-guard ip-record

Syntax
display system-guard ip-record
View
Any view
Parameters
None
Description
Use the display system-guard ip-record command to view the information about IP packets received
by the CPU in the current monitoring cycle.
Examples
# View the information about IP packets received by the CPU in the current monitoring cycle.
<Sysname> display system-guard ip-record
'M': Master port of link aggregation
Index Source IP
--------------------------------------------------
1 000.000.000.000
2 000.000.000.000
3 000.000.000.000
4 000.000.000.000
5 000.000.000.000
......
Table 4-2 Description on the fields of the display system-guard ip-record command
Index
Source IP
Destination IP
Port

display system-guard l3err state

Syntax
display system-guard l3err state
View
Any view
Destination IP
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
Field
Port
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
Index
Source IP address
Destination IP address
Incoming port
4-2
Description