Igmp Configuration Commands; Display Igmp Group - 3Com 5500-EI PWR Reference Manual

2

IGMP Configuration Commands

IGMP Configuration Commands

display igmp group

Syntax
display igmp group [ group-address | interface interface-type interface-number ]
View
Any view
Parameters
group-address: Multicast group address. With this argument provided, this command displays the
information of the specified IGMP multicast group.
Interface interface-type interface-number: Specifies an interface by its type and number. With this
argument provided, this command displays the IGMP multicast group information about the specified
interface.
Description
Use the display igmp group command to display the IGMP multicast group information.
Without any parameters provided, the command displays the information of all IGMP multicast groups.
Related commands: igmp host-join.
Examples
# Display the information of all IGMP multicast groups on the switch.
<Sysname> display igmp group
Total 3 IGMP groups reported on this router
LoopBack0 (20.20.20.20): Total 3 IGMP Groups reported:
Group Address
225.1.1.1
225.1.1.3
225.1.1.2
Last Reporter Uptime
20.20.20.20 00:02:04
20.20.20.20 00:02:04
20.20.20.20 00:02:04
2-1
Expires
00:01:15
00:01:15
00:01:17