Display Queue-Scheduler - 3Com 5500-EI PWR Reference Manual

View
Any view
Parameters
interface-type interface-number: Specifies the type and number of a port for which traffic
accounting configuration is to be displayed.
unit-id: Unit ID of the switch for which traffic accounting configuration and traffic statistics
are to be displayed. For the value range for the unit-id argument, refer to
Description
Use the display qos-interface traffic-statistic command to display the traffic accounting
configuration and traffic statistics of a port or a unit.
Related commands: traffic-statistic.
Examples
# Display the traffic accounting configuration and traffic statistics of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet1/0/1 traffic-statistic
Ethernet1/0/1: traffic-statistic
Inbound:
Matches: Acl 2000 rule 2
6 packets inprofile
0 packet outprofile
Refer to Table 1-3

display queue-scheduler

Syntax
display queue-scheduler
View
Any view
Parameters
None
Description
Use the display queue-scheduler command to display the global queue scheduling
configuration.
This command does not display the weight or bandwidth set for a queue in port view. To
display the setting, you can perform the display this command in port view.
Related commands: queue-scheduler.
running
for the description on the output fields.
1-11
Table 1-2.