Key - 3Com 5500-EI PWR Reference Manual

By default, no HWTACACS scheme exists.
Examples
# Create an HWTACACS scheme named "hwt1" and enter the corresponding HWTACACS
scheme view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1]

key

Syntax
key { accounting | authentication | authorization } string
undo key { accounting | authentication | authorization }
View
HWTACACS scheme view
Parameters
accounting: Sets a shared key for HWTACACS accounting messages.
authentication: Sets a shared key for HWTACACS authentication messages.
authorization: Sets a shared key for HWTACACS authorization messages.
string: Shared key to be set, a string of up to 16 characters.
Description
Use the key command to configure a shared key for HWTACACS authentication, authorization or
accounting messages.
Use the undo key command to delete such a configuration.
By default, no key is set for HWTACACS messages.
Related commands: display hwtacacs.
Examples
# Use hello as the shared key for HWTACACS accounting messages in HWTACACS scheme
hwt1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting hello
1-64