Tos - 3Com 5500-EI PWR Reference Manual

Examples
# Set the timeout time for one probe in an ICMP test to 10 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] test-type icmp
[Sysname-remote-ping-administrator-icmp] timeout 10

tos

Syntax
tos value
undo tos
View
remote-ping test group view
Parameters
value: ToS value in a remote-ping test packet header, in the range of 0 to 255.
Description
Use the tos command to configure the ToS value in a remote-ping test packet header.
Use the undo tos command to remove the ToS value in a remote-ping test packet header.
By default, no ToS value is configured.
This command does not apply to DHCP tests.
Examples
# Set the ToS value in the header of an ICMP test packet to 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] test-type icmp
[Sysname-remote-ping-administrator-icmp] tos 1
ttl
Syntax
ttl number
undo ttl
1-37