Xmodem Get - 3Com 5500-EI PWR Reference Manual

device-name: File name, in the form of unit[NO.]>flash:, which is used to indicate that the specified file
is stored in the Flash of a specified switch.
Description
Use the update fabric command to upgrade the host software of all devices in a Fabric.
Examples
# Use the file named s5500.app in the Flash memory of Unit 2 to upgrade the host software of the
devices in a Fabric.
<Sysname> update fabric unit2>flash:/s5500.app
This will update the Fabric. Continue? [Y/N] y
The software is verifying ...
The result of verification is :
Unit ID Free space(bytes)
1
2
warning: the verification is completed, start the file transmission? [Y/N] y
The fabric is being updated,
The s5500.app is stored on unit 1 successfully!
The s5500.app is stored on unit 2 successfully!
Do you want to set s5500.app to be running agent next time to boot?[Y/N] y
The s5500.app is configured successfully!

xmodem get

Syntax
xmodem get { file-url | device-name }
View
User view
Parameters
file-url: Path plus name of a host software file in the Flash, a string of 1 to 64 characters.
device-name: File name, in the form of unit[NO.]>flash:, which is used to indicate that the specified file
is stored in the Flash of a specified switch.
Description
Use the xmodem get command to download files from the local device connected with the Console
port of a switch through XModem. This command can be configured only when the device logging onto
a switch through the Console port.
Note that, the communication parameter settings of the Console port of the switch and those of the
serial port of the local device must be consistent and, the interface type of the Console port must be
AUX.
Examples
# Download files through XModem.
<Sysname> xmodem get flash:/config.cfg
Enough
15281873
15409873
100%
Version comparison
Y Y
Y Y
3-18