Show Qos Interface - 3Com 3CRUS2475 Command Reference Manual

136 C 9: Q
HAPTER O

show qos interface

S C
OMMANDS
Examples
The following example limits the rate of the incoming traffic to 62.
Console(config-ip)# rate-limit 62
The show qos interface Privileged EXEC mode command displays
Quality of Service (QoS) information on the interface.
Syntax
show qos interface [ethernet interface-number | port-channel
number | port-channel number] [queueing | policers | shapers]
Parameters
interface-number — Valid Ethernet port number.
■
number — Valid port-channel number.
■
queuing — Displays the queue strategy (WRR or EF), the weight for
■
WRR queues, the CoS to queue map and the EF priority.
policers — Displays the shaper of the specified interface and the
■
shaper for the queue on the specified interface.
shapers — Displays all the policers configured for this interface, their
■
setting and the number of policers currently unused.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
If no keyword is specified, port QoS mode (for example., DSCP trusted,
CoS trusted, untrusted), default CoS value, DSCP-to-DSCP-mutation map
attached to the port, and policy map attached to the interface are
displayed.
If no interface is specified, QoS information about all interfaces is
displayed.