Filter-Policy Export - 3Com 5500-EI PWR Reference Manual

View
Any view
Parameters
None
Description
Use the display rip routing command to display RIP routing information.
Examples
# Display the information of the RIP routing table.
<Sysname> display rip routing
A = Active
C = Change
Destination/Mask
192.168.110.0/24
200.1.1.0/24
130.1.0.0/16
Table 3-3 Description on the fields of the display rip routing command
Destination/Mask
Cost
NextHop
Age
SourceGateway
Att

filter-policy export

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] ]
undo filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] ]
filter-policy route-policy route-policy-name export
undo filter-policy route-policy route-policy-name export
RIP routing table: public net
I = Inactive G = Garbage collection
T = Trigger RIP
Cost NextHop
1 31.31.31.8
1 31.31.31.8
1 31.31.31.8
Field
Age SourceGateway
7s 31.31.31.8
7s 31.31.31.8
7s 31.31.31.8
Destination address/Mask
Cost
Net hop address
Time elapsed after the route is advertised
Gateway originating the route
Attributes of a route:
A: Active route
I: Inactive route
G: Working state of the garbage collection
timer
C: Change state
T: Triggered RIP
3-5
Att
A
A
A
Description