The Switch - 3Com 5500-EI PWR Reference Manual

Configuration: Transmit Period
ReAuth Period
Quiet Period
Supp Timeout
Interval between version requests is 30s
Maximal request times for version information is 3
The maximal retransmitting times
EAD Quick Deploy configuration:
Url: http: //192.168.19.23
Free-ip: 192.168.19.0 255.255.255.0
Acl-timeout:
Total maximum 802.1x user resource number is 1024
Total current used 802.1x resource number is 1
Ethernet1/0/1 is link-up
802.1X protocol is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Version-Check is disabled
The port is an authenticator
Authentication Mode is Auto
Port Control Type is Port-based
ReAuthenticate is disabled
Max number of on-line users is 256
Authentication Success: 4, Failed: 2
EAPOL Packets: Tx 7991, Rx 14
Sent EAP Request/Identity Packets : 7981
EAP Request/Challenge Packets: 0
Received EAPOL Start Packets : 5
EAPOL LogOff Packets: 1
EAP Response/Identity Packets : 4
EAP Response/Challenge Packets: 4
Error Packets: 0
1. Authenticated user : MAC address: 000d-88f6-44c1
Controlled User(s) amount to 1
Ethernet1/0/2
......
Table 1-1 Description on the fields of the display dot1x command
Field
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
30 s, Handshake Period
3600 s, ReAuth MaxTimes
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
30 m
802.1x protocol (802.1x for short) is enabled on

the switch.

CHAP authentication is enabled.
1-2
15 s
2
100 s
2
Description