Tftp Put - 3Com 5500-EI PWR Reference Manual

Parameters
cluster: Downloads files through the shared TFTP server of the cluster.
tftp-server: IP address or host name of the TFTP server.
source-file: Name of the file to be downloaded from the shared TFTP server of the cluster.
destination-file: Name of the file to which the downloaded file will be saved on the switch.
Description
Use the tftp get command to download a file from a specific directory on the shared TFTP server to the
switch.
You can use the tftp-server command on the management device to configure the shared TFTP server
of the cluster, which is used for software version update and configuration file backup of the cluster
members. For TFTP server rights and directory configuration, refer to the user guide of the TFTP server
software.
Related commands: tftp put, tftp-server.
You need to specify the cluster keyword completely in the command.
For description of other parameters of the tftp command, refer to the FTP-SFTP-TFTP part of the
manual.
Examples
# Download file LANSwitch.app from the shared TFTP server of the cluster to the switch and save it as
vs.app.
<123_1.Sysname> tftp cluster get LANSwitch.app vs.app

tftp put

Syntax
tftp { cluster | tftp-server } put source-file [ destination-file ]
View
User view
Parameters
cluster: Uploads files through the shared TFTP server of the cluster.
tftp-server: IP address or host name of the TFTP server.
source-file: File name to be uploaded to the shared TFTP server.
destination-file: Name of the file to which the uploaded file will be saved in the storage directory of the
TFTP server.
1-35