Display Qos-Interface Line-Rate - 3Com 5500-EI PWR Reference Manual

Field
Inbound
Matches
Effect mode
Egress port
Target rate
Bucket burst size
Exceed action
Priority action
Redirected to
inprofile
outprofile
Mirrored to
Queue scheduling mode
Remark vlan

display qos-interface line-rate

Syntax
display qos-interface { interface-type interface-number | unit-id } line-rate
View
Any view
Packet direction
ACL rules for traffic classifying
Union effect, indicating that the ACL referenced in the
traffic-limit command takes effect together with the other
ACLs applied to the port.
The specified egress port
Traffic policing target rate, in kbps
Maximum burst traffic size allowed, in KB
Action to take for exceeding packets:
drop: Drops the packets.
remark-dscp: Re-marks the DSCP precedence of the
packets and forwards the packets.
Priority marking action, which can be:
cos: Sets 802.1p precedence for packets.
dscp: Sets DSCP precedence for packets.
ip-precedence: Sets IP precedence for packets.
local-precedence: Sets local precedence for packets.
"interface" indicates that the packets are redirected to
the port.
"cpu" indicates that the packets are redirected to the
CPU.
"link-aggregation-group" indicates that the packets are
redirected to the aggregation group.
Statistics about the packets within the traffic limit
Statistics about the packets beyond the traffic limit
"monitor interface" indicates that the packets are
duplicated to a port.
"cpu" indicates that the packets are duplicated to the
CPU.
Queue scheduling algorithm, which can be:
strict priority
weighted round robin (WRR)
weighted fair queuing (WFQ)
Target VLAN ID used in VLAN mapping
1-6
Description