Display Lldp Neighbor-Information - 3Com 5500-EI PWR Reference Manual

Port PSE Priority
Port Available power value

display lldp neighbor-information

Syntax
display lldp neighbor-information [ interface interface-type interface-number ] [ brief ]
View
Any view
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
brief: Displays the LLDP information in brief.
Description
Use the display lldp neighbor-information command to display the LLDP information about the
neighboring devices received through a port.
With no keyword/argument specified, this command displays the LLDP information received through all
the ports.
Examples
# Display the LLDP information received through all the ports.
<Sysname> display lldp neighbor-information
LLDP neighbor-information of port 1[Ethernet1/0/1]:
Neighbor index
Update time
Chassis type
Chassis ID
Port ID type
Port ID
Port description : Ethernet1/0/1 Interface
System name
System description : Sysname Switch
System capabilities supported : Bridge,Router
System capabilities enabled
Management address type
Management address
Management address interface type : IfIndex
Field
: 1
: 0 days,0 hours,1 minutes,1 seconds
: MAC address
: 000f-0055-0002
: Interface name
: Ethernet1/0/1
: Sysname
: Bridge,Router
: ipV4
: 127.0.0.1
Description
Port PSE priority, which can be :
Unknown
Critical
High
Low
PoE power
1-5