display cluster base-members
Syntax
display cluster base-members
View
Any view
Parameters
None
Description
Use the display cluster base-members command to display the information about all the devices in
the base cluster topology, such as member number, name, MAC address, and the current status of
each device in a cluster.
Examples
# Display the information about all the devices in the base cluster topology.
<aaa_0.Sysname> display cluster base-members
SN
Device
0
aaa_0.Sysname
1
aaa_1.5500-EI
Table 1-10 Description on the fields of display cluster base-members
SN
Device
MAC Address
Status
display cluster base-topology
Syntax
display cluster base-topology [ mac-address mac-address | member member-id ]
View
Any view
Parameters
mac-address mac-address: Displays the structure of the standard topology three layers above or
below the node specified by the MAC address.
Field
1-40
MAC Adress
Status
000f-e200-30a0
UP
000f-e200-86e4
UP
Description
Device number in the cluster
Device name
Device MAC address
Device status
Up: The member is connected.
Down: The member is disconnected.